Mahlkonig DK15LH( Tungsten Carbide burr , Recommend for Longlife and work hard )
สอบถามข้อมูลสินค้าเพิ่มเติม โทร 02-681-2424 ต่อ 1201-1205
THE enduring ONE of the MAHLKÖNIG®Industrial Coffee Grinders
• small space requirement
• movable container for the ground product
• tight discharge chute for dustreduced
grinding
• large hoppers
• lock plate to interrupt the feeding of the product
to be ground
• integrated hopper magnets as a protection
against metal in the product
• powerful three-phase motors with surface cooling
and high starting torque. This makes them very
suitable for continuous use
• air cooling of grinder casing
• service-free, constantly greased bearings
• motor protection against electrical overload
• extremly wear resistant, precision grinding discs
for careful cutting of the material
• the grind adjustment wheel provides fine, accurately
repeatable control of the degree of grinding finess.
The smaller daughter of the DK 27. But already a solid proven industrial grinder for permanent use. Available also with the stainless transport container (200 litres / 53 gal).
• DK 15 LS with burrs from tool steel – double sided
to double the life time of the burrs.
• DK 15 LH with burrs from tungsten carbide – double sided
for up to 20 times longer life time of the burrs.
SPECIFICATIONS | |
Hopper Capacity | 66 lbs |
Grinding Capacity – fine to medium | 265 - 287 lbs/h |
Voltage
| 208 - 220 V |
Frequency / Phases
| 60 Hz / Three-Phase
|
Motor - rated power, Amps / hp | 9.7 Amps / 3 hp |
Grinding Disc Diameter
| 130 mm
|
Grinding Disc Material
| tungsten carbide
|
Dimensions (w x d x h) | 31.1“ x 48.4“ x 61.0“ |
Net weight | 291.0 lbs |
Shipping Weight
| 478.4 lbs
|
| |
EQUIPMENT FEATURES | |
Container | 200l, mobile (53 gal)
|
Container dimensoins (w x d x h) | 27.2“ x 31.1“ x 27.6“ |
Hopper Magnet
| yes
|
Overload Protection
| yes |
Shot Counter
| yes |
Standard colours (structured paint) | grey-red or copper
|
| |
SPECIAL FEATURES
| |
Other Grinding Goods | Coffee, spices, grains, poppy seed, linseed
|
Tungsten Carbide Discs | yes
|
Pod-Grinding
| yes |